Admiral
|
|||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||
|
|
|
|
|||||||||||||||||||||||||
| The
coils frost up
|
| Note:
If your repair problem isn't listed, click
here
to email the RepairGuru. He will give you the help you need. |
|
|
| The
coils you see on the back of your dehumidifier are the evaporator.
When the unit runs, the coils get very cold. As the fan draws the
room air over the coils, the humidity in the air condenses out of
the air onto the cold coils. But, if the temperature of the air
the fan draws over the coils is too cool, the humidity that condenses
out of the air freezes on the coils.
|
|
|
|
|
| Your
dehumidifier has a circulating fan that draws the room air over
the coils. If there's no air movement out the front or back of the
unit, the fan motor may be burned out or stuck, or the fan blade
may be broken. If so, you need to replace the fan motor or the fan
blade. |
|
|
|
|
| The
tank may be full. Your dehumidifier has a safety device that turns
off the dehumidifier when the water tank is full. Usually the tank
itself either presses against a switch or there's a device connected
to the tank that triggers a switch when the tank is in place and
full. |
|
|
|
|
| When
the container fills quickly, your dehumidifier is doing its job.
If the container fills quickly for many days in a row, you may want
to locate the source of the humidity (for example, is there an unsealed
crawl space?) and see if you can correct the problem at the source. |
|
|
|
|
| If
your dehumidifier doesn't seem to run often but the humidity in
the room is high, try adjusting the humidistat control on the dehumidifier
to a dryer setting. If the dehumidifier seems to run constantly,
but there's little or no water in the container, there may be a
problem in the refrigeration system. Try cleaning the unit. If that
doesn't work, you can't repair the refrigeration system yourself,
you need a qualified appliance repair technician to do that. |
| |
| |
Warning!
To avoid personal injury or even death, always disconnect your appliance
from its power source--that is, unplug it or break the connection at
the circuit breaker or fuse box--before you do any troubleshooting or
repair work on your appliance. Also, because some components may have
sharp edges, use caution while working on your appliance.